2024 Volume 92 Issue 4 Pages 049001
Corrigenda
Since an error was found in the experimental section of the above-mentioned paper published by the authors, it is corrected as follows and correctly shown in the experimental section of this paper.
2. Experimental
2.1 Fabrication of an all-solid-state (ASS) cell
(Original) A 10 µL droplet of aqueous solution saturated with H3BO3 was placed on the LCO-applied LLZT and then dried in a vacuum. Subsequently, a 10 µL droplet of aqueous solution saturated with LiOH was placed on the LCO-applied LLZT and then dried in a vacuum.
(Corrected) A 10 µL droplet of aqueous solution saturated with LiOH was placed on the LCO-applied LLZT and then dried in a vacuum. Subsequently, a 10 µL droplet of aqueous solution saturated with H3BO3 was placed on the LCO-applied LLZT and then dried in a vacuum.
The corresponding author apologize for the error and any consequent inconvenience to readers.
March 29, 2024
Takuya MASUDA
Tsuyoshi OHNISHI
Tsukasa Iwama: Investigation (Lead), Writing – original draft (Lead)
Tsuyoshi Ohnishi: Investigation (Equal), Methodology (Equal), Writing – review & editing (Supporting)
Takuya Masuda: Conceptualization (Lead), Funding acquisition (Lead), Investigation (Supporting), Methodology (Supporting), Project administration (Lead), Resources (Lead), Supervision (Lead), Writing – review & editing (Lead)
T. Iwama: ECSJ Student Member
T. Masuda: ECSJ Active Member
The authors declare no conflict of interest in the manuscript.