抄録
This paper proposes a variable speed wind generation system using a direct torque controlled interior permanent magnet synchronous generator. The proposed system has no wind speed and generator position sensors, and thus, it is considered that the proposed system has cost and reliability advantages. The proposed direct torque control (DTC) system in wind power generation has several advantages over conventional current control. First, DTC is well suited for the maximum power point tracking (MPPT) control that is implemented by controlling the generator torque. Second, the method of flux-weakening to maintain the terminal voltage at the limiting value of the converter is simple. Finally, a novel method is proposed for torque limiting, which makes it easy to maintain the armature current at the limiting value. The proposed method accomplishes current limiting using the reactive torque, which is calculated as the inner product of the flux and current. This does not require generator parameters such as magnet flux and inductances. Experimental results demonstrate the effectiveness of the proposed system using a wind turbine emulator instead of the actual wind turbine.
