International Journal of Automation Technology
Online ISSN : 1883-8022
Print ISSN : 1881-7629
ISSN-L : 1881-7629
Special Issue on Innovative SiC/GaN/Diamond Single-Crystal Substrates and Planarization Processing Technologies for the Next Generation ICT Society
Patterned Sapphire Substrates for III-Nitride Epitaxial Growth
Natsuko OmiyaHideo AidaYutaka KimuraYuki KawamataSeong-Woo KimMichio Uneda
Author information
JOURNAL OPEN ACCESS

2018 Volume 12 Issue 2 Pages 179-186

Details
Abstract

GaN-based light emitting diodes (LEDs) were epitaxially grown on patterned sapphire substrates (PSSs) to investigate the effectiveness of PSSs for improving the internal quantum efficiency (IQE) and light extraction efficiency (LEE) of the LEDs. Using X-ray diffraction (XRD) and light output measurements, it was observed that the PSSs improved the crystal quality of the LED films and enhanced the LED light intensity. Based on these experimental results, we discuss whether the enhanced light intensity can be attributed to improvements in the IQE or the LEE. The contribution of the IQE improvement to the light intensity was estimated through a comparison of the calculated light emitting area of the LED chip and the measured light output. As a result, it was revealed that the IQE improvement is not the main cause of the increase in the light intensity, indicating that the PSSs mainly improve the LEE. A comparison of the calculated number of bumps on the PSSs and the measured light output of the LEDs suggests that an increase in the number of bumps could affect the improvement in the LEE.

Content from these authors

This article cannot obtain the latest cited-by information.

© 2018 Fuji Technology Press Ltd.

This article is licensed under a Creative Commons [Attribution-NoDerivatives 4.0 International] license (https://creativecommons.org/licenses/by-nd/4.0/).
The journal is fully Open Access under Creative Commons licenses and all articles are free to access at IJAT Official Site.
https://www.fujipress.jp/ijat/au-about/
Previous article Next article
feedback
Top