International Journal of Automation Technology
Online ISSN : 1883-8022
Print ISSN : 1881-7629
ISSN-L : 1881-7629
Regular Papers
Friction Reduction by Micro-Textured Surfaces in Lubrication
Yue SunKeita ShimadaShaolin XuMasayoshi MizutaniTsunemoto Kuriyagawa
著者情報
ジャーナル オープンアクセス

2018 年 12 巻 4 号 p. 603-610

詳細
抄録

Experimental investigations were carried out to verify if the friction reduction in lubrication can be expanded by a textured surface with sawtooth riblets. Sawtooth riblets were formed by ultraprecision diamond cutting, with a ridge angle of about 60°–90° and height of about 20–50 μm on the contact surface. Six types of textured surfaces with different ridge angles, heights, and sliding directions were tested and compared with the untextured surface. The tribological tests were conducted by a flat-on-flat tribometer in lubrication. The effects of the ridge angle, height, and relative sliding direction on the friction coefficient in lubrication were reported.

著者関連情報

この記事は最新の被引用情報を取得できません。

© 2018 Fuji Technology Press Ltd.

This article is licensed under a Creative Commons [Attribution-NoDerivatives 4.0 International] license (https://creativecommons.org/licenses/by-nd/4.0/).
The journal is fully Open Access under Creative Commons licenses and all articles are free to access at IJAT Official Site.
https://www.fujipress.jp/ijat/au-about/
前の記事
feedback
Top