International Journal of the Society of Materials Engineering for Resources
Online ISSN : 1884-6629
Print ISSN : 1347-9725
ISSN-L : 1347-9725
Originals
New Permeability Test Based on Falling Head Method in Rock Core
Tadao IMAINaoto KAMOSHIDAShinji YAMAGUCHIFumio SUGIMOTO
著者情報
ジャーナル フリー

2010 年 17 巻 1 号 p. 78-85

詳細
抄録
The permeability of rock matrices is not routinely measured because the equipment is expensive and the measurements are time-consuming. We designed a new laboratory permeability test using low-cost apparatus and investigated its performance. The method is a variation of the falling head method, in which the standpipe used as the pressure source is replaced with a pressure accumulator. High pressure is applied to a rock specimen, making it possible to measure permeability within an hour. The apparatus produces radial flow from the surface to a central hole drilled in a cylindrical specimen. We determined that the apparatus measures hydraulic conductivity in the range of 3.5×10-10 to 2.6×10-4 cm/s. The error in hydraulic conductivity obtained from repeated measurements is ±∼10%, and the difference in conductivity between this method and the standpipe method is ∼25%. For a rock with a hydraulic conductivity of 3.0×10-9 cm/s, measurement takes at least 800 s.
著者関連情報
© 2010 The Society of Materials Engineering for Resources of Japan
前の記事
feedback
Top