鋳物
Online ISSN : 2186-0335
Print ISSN : 0021-4396
ISSN-L : 0021-4396
研究論文
熔銑の水素分析試料採取方法
前川 静彌中川 義隆曽我 政雄須藤 実
著者情報
ジャーナル フリー

1960 年 32 巻 9 号 p. 658-663

詳細
抄録
  Results of the study conducted on vacuum sampling method are given. The method is almost perfect and comparatively simple in operation.
  The sampler for vacuum sampling method is as shown in Fig. 1 and photo. 1.
  In case of determining hydrogen content in molten pig iron in the ladle, vacuum sampling method which is different from casting method and has generally shown lower values, because of gas released during solidification of molten pig iron in the sample case.
  The gas evolved during solidification of molten pig iron in the sampler of vacuum sampling method is caught at the upper part of the sampler and found in analysis.
  In addetion casting method is affected by atmosphere, but vacuum method is not affected.
  The vacuum sampling method is very good theoretically and easy for daily operation as compared with previous other methods.
著者関連情報
© 1960 公益社団法人 日本鋳造工学会
前の記事
feedback
Top