STIFF ELECTROHYDRAULIC DRIVES USING A HYBRID VALVE

抄録

One of the main problems of electrohydraulic drives is relatively low dynamic load stiffness due to compressibility of oil. Sudden load variations can cause significant deviations of the position of the drive and, consequently, a reduced precision of the controlled process. This has led to a partial substitution of electrohydraulic drives by electromechanical drives in a low power range recently.
One of the approaches to increase dynamic stiffness of a cylinder is to raise valve dynamics. Thus, the system can react to a control deviation and provide the cylinder with a compensating flow faster.
The objective of this paper is to show the development of a stiff cylinder drive using a new high-response servovalvethe hybrid valve. In contrast to a conventional servovalve with an unmovable sleeve, the idea of the hybrid valve is to actuate both the spool and the sleeve simultaneously in opposite directions. Using a piezo-actuator as sleeve drive provides the hybrid valve with very high dynamics in the range of small valve opening, which should be sufficient to increase the disturbance rejection of the cylinder. The performance of the valve prototype and of the cylinder will be shown, and application fields will be discussed in this work.