Mathematical Model for the Thin Strip Cold Rolling and Temper Rolling Process with the Influence Function Method

抄録

A mathematical model for the thin strip cold and temper rolling process has been developed using the influence function method. By solving the equations describing the roll gap phenomena in a unique procedure and considering more influence factors, the model offers significant improvements in accuracy, robustness and generality of the solution for the thin strip cold and temper rolling conditions. The relationship between the shape of the roll profile and the roll force was also discussed. Calculation results show that any change increasing the roll force may result in or enlarge the central flat region in the deformation zone. Applied to the temper rolling process, the model can well predict not only the rolling load but also the large forward slip. Therefore, the measured forward slip, together with the measured roll force, was used to calibrate the model. The model was installed in the setup computer of a temper rolling mill to make parallel setup calculations. The calculation results showed good agreement with the measured data and the validity and precision of the model were proven.