2007 年 47 巻 4 号 p. 533-538
In many metallurgical operations, effective analysis of the processes can be very difficult with available technology. This is especially true if the analysis is to be performed on-line and in a harsh environment characterized by high temperatures, dust and liquid metal. Protection of the equipment requires both rugged encapsulation as well as elaborate sampling systems and exposure of the equipment to the hazardous environment must be minimised. Often this result in an increased level of service and maintenance requirements and, in the worst case, the maintenance cost might be so high that the equipment is not installed. Microwave technology is a versatile and powerful tool with many different applications in the scientific community. It is insensitive to dust and fume and, for several years, the technology has been tested at MEFOS and evaluated for different metallurgical processes. It has been applied to slag thickness measurement and slag composition in an induction furnace, 3D imaging of the burden surface in a charging model on pilot scale as well as raceway depth measurements in a Blast Furnace. The idea of using microwave technology for gas analysis in metallurgical processes has also been explored. However, despite its many advantages, microwave technology is still not employed extensively in the steel and metal industries.
