ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Characteristics of Deformation Behavior in Channel Universal Rolling
Yukio TakashimaToshiki Hiruta
Author information
JOURNALS OPEN ACCESS FULL-TEXT HTML

2013 Volume 53 Issue 4 Pages 690-697

Details
Abstract

Universal rolling of channel sections has various advantages in both productivity and product quality. However, research on deformation in channel universal rolling appears to be inadequate. In particular, the effect of rolling conditions such as thickness reductions on deformation behavior is still unknown. To investigate the influence of rolling conditions in detail, a model rolling experiment and finite element analyses of channel universal rolling were conducted. The results showed that flange spread displays a linear relationship against the reduction balance, which was defined as the difference of the flange and web thickness strains. Similar linear behaviors of the flange depth and bulge height against the reduction balance were also demonstrated. The results of a non-steady-state finite element simulation showed that the friction force between the flange inside surface and the horizontal roll side surface caused asymmetric flange deformation, decreasing flange depth and increasing bulge height. The results of this research indicate the importance of the reduction balance for controlling flange deformations, and in particular, for reducing bulge height. Finally, the suitable range of the reduction balance considering other phenomena was discussed.

Information related to the author
© 2013 by The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top