ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Blowpipe Antenna in Blast Furnace Raceway Depth Measurement
Jidong Wei Xianzhong Chen
著者情報
ジャーナル オープンアクセス HTML

2015 年 55 巻 3 号 p. 586-591

詳細
抄録
A high gain blowpipe antenna has been presented in this paper. The blowpipe is a pipe used to blow hot air into the Blast Furnace (BF). It has formed the antenna as the radiation unit. A multi-stages cylindrical waveguide has been designed and employed to be the feeding unit. The two units of antenna are separated outside and inside the BF. They are easy to assemble during the BF production process. The antenna operates from 24 to 26 GHz. The simulation result shows that the blowpipe antenna has 25 dBi gain, 20 dB return loss and 30° HPBW (Half Power Beam Width) at the frequency of 25 GHz. Prototype antenna has been fabricated and measured the raceway depth in a real BF. The experiment result shows that the blowpipe antenna can be used in raceway depth measurement. It has advantages of high gain and easy-to-assemble.
著者関連情報
© 2015 by The Iron and Steel Institute of Japan

This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top