2023 年 63 巻 6 号 p. 1096-1106
To investigate the effect of grain sizes on hydrogen embrittlement of 4N-purity iron, miniature tensile tests were conducted after hydrogen charging for the ultrafine-grained specimens produced by high-pressure torsion and subsequent annealing. Hydrogen embrittlement indexes defined from reduction of area were increased with decreasing grain size, and shear-type fracture occurred with fine dimples on the fracture surface of the diagonally raptured tensile specimen with a smaller grain size. The formation and growth of microvoids at triple junctions of grain boundaries ahead of propagated cracks were responsible for such earlier shear-type fracture because necking between adjacent microvoids more likely and extensively occurred. In the specimens with larger grain sizes or without hydrogen charging, on the other hand, local coalescence and growth of microvoids were predominant due to longer distances between triple junctions, resulting in void coalescence-type fracture with coarser dimple patterns. Therefore, hydrogen atoms introduced by hydrogen charging are considered to enhance the formation of deformation-induced vacancies in ultrafine-grained iron, resulting in shear-type fracture with finer dimple patterns.
