ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
A Numerical Model for Cooling Rate Dependence of the Degree of Undercooling during Rapid Solidification of 18Cr-8Ni Stainless Steel
Hiroaki FujinoToshio SuzukiItaru Jimbo
著者情報
ジャーナル フリー

1997 年 37 巻 11 号 p. 1107-1111

詳細
抄録

Cooling rate dependence of the degree of undercooling at the onset of solidification for 18Cr-8Ni stainless steel was numerically analyzed using a classical nucleation theory. Transient time which can characterize the time-dependent behavior of nucleation was evaluated for iron. It is shown that temperature change in the experiment is slow enough against the transient time and no time-dependent behavior can be expected within the predictions by the classical theory. A new model for time-dependent contact angle was proposed so as to reproduce the cooling rate dependence of the degree of undercooling. This prediction model shows a good agreement with the experimental result for 18Cr-8Ni stainless steel. The effect of substrate temperature on the degree of undercooling and the primary nucleation phase of 18Cr-8Ni stainless steel was also discussed using the model.

著者関連情報
© The Iron and Steel Institute of Japan
前の記事 次の記事
feedback
Top