Effect of Heat Treatment on Precipitation Kinetics in High-Cr Ferritic Steels

抄録

Precipitation strengthening is important to improve creep strength of heat resisting steels at elevated temperatures. Especially, in the high-Cr ferritic steels recently developed for Ultra Super Critical Power Plants, precipitation behavior is complicated and should be clarified because the correlation between various strengthening factors are still not well understood. In this study, we focus on the change in precipitation behavior of MX type carbonitrides in model steels with different heat treatment conditions.
It is found that dominant precipitation behavior has been changed with cooling rate from normalization temperature before tempering and better creep properties have been obtained in the steel quenched rather than in the one air-cooled. It is confirmed that precipitation of M₂₃C₆ is suppressed and total fraction of MX is relatively increased by the quenching procedure. It is thought that better creep resistance is mainly due to fine distribution of MX that is achieved by suppressing typical co-precipitation of MX such as Nb(C, N)-VN during cooling after normalization and tempering.