2004 年 44 巻 7 号 p. 1157-1166
Mathematical models for tracking the melting of cored wire during its injection into the steel bath have been developed in the past though important aspects of the formulations have not been discussed in sufficient detail. As a result, it is difficult to use the results of these models to derive benefits for a specific steel melting shop.
A general purpose mathematical model has been developed at R & D, Tata Steel, using the finite difference approach with a fully implicit scheme to simulate the process of cored wire injection taking into account the different operating practices encountered in the steel shop. Numerical simulation of this kind of problem, involving moving boundary, typically suffers from the limitation that the progressive solidification of frozen layers that takes place is not made part of the thermal balance till it attains the size of a full node and thus the heat gained or lost by this “partial node” is not accounted for till such time. An alternative numerical formulation has been developed to rectify this.
Owing to the difficulty in making a direct validation, this model has been verified through a novel approach. This work suggests that the use of different wire dimensions (13-18 mm diameter and 0.4-0.6 mm casing), depending on the steel grades to be processed, is necessary in order to extract the maximum benefit.
