Computer-generated hologram (CGH) of the real object is able to be fabricated, if the 3D object data can be obtained from the real object. The published paper says that the portrait CGH can be output, whose object data are made by the 3D scanner. Making the object data from the laser 3D scanner, however, requires the much time for the needs of mannual correction. Also, the Kinect, as an economical 3D measuring device, is employed for the real-time CGH. Conducted researches only display the small reconstructed image. This paper proposes fabrication of the hologram from the real object, which reconstruct the large image size and wide viewing angle, with the computer-generated image hologram. The multi-directional object data converted from the Kinect are used for the calculation of CGH.