2025 年 90 巻 4 号 p. 198-209
To reduce monitoring cost and to improve the effectiveness of monitoring in CCUS projects, the acquisition of vertical seismic profile(VSP)using distributed acoustic sensor(DAS)can be one of the solutions. There are few examples that evaluate vertical resolution and imaging area of DAS-VSP in CCUS pilot projects. Furthermore, the imaging quality of DAS-VSP can be improved by applying full waveform inversion with elastic wave equations(e-FWI)to estimate the subsurface P- and S-wave velocities. In this study, we evaluate the imageable area and e-FWI results using DAS-VSP data acquired as a pre-injection survey in an onshore CCUS demonstration field in Japan. First, to evaluate the vertical resolution, we compared the DAS-VSP data with the synthetic and the surface seismic profile(SSP)data along the wells. We then compared the results of the horizon interpretations and the surface model generated from the well-tops data to evaluate the imageable area. The evaluation results showed that the DAS data had a higher vertical resolution than that of the SSP data, and that the imageable area was hundreds of meters from the DAS installed wellhead. Lastly, to evaluate the improvement in the accuracy with the application of e-FWI to the DAS-VSP data, we compared the estimated velocity data along the wells with the log velocity data. In addition, we also compared the estimated velocity data with the surface model generated from the well-tops data. As a result, the multi-well e-FWI result showed a better accuracy than the single-well one and its estimation range also showed hundreds of meters from the DAS installed wellhead.