Simulation Analysis of Transport of Boron Dust Particles Injected by Impurity Powder Dropper in the Large Helical Device

抄録

Boron dust particles were injected by an impurity powder dropper to improve plasma confinement and perform wall conditioning in the Large Helical Device. A fast-framing camera for monitoring dust particle trajectories in the peripheral plasma detected a change in the ablation positions of the dust particles depending on the plasma density and heating power. An analysis using a three-dimensional edge plasma simulation code (EMC3-EIRENE) and a dust transport simulation code (DUSTT) was applied to understand these observations. The simulations proved that the dust particle trajectories are more deflected toward the outboard side of the torus by the effect of the plasma flow in an upper divertor leg for higher plasma densities and higher plasma heating powers. The simulation successfully reproduced observations of the change in the ablation positions in the peripheral plasma.