JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Online ISSN : 1881-1299
Print ISSN : 0021-9592
Characterization of Supported Nickel Catalysts Prepared by Deposition of Nickel Chloride Vapor on Alumina
Yoshimitsu UemuraYasuo HatateAtsushi Ikari
著者情報
ジャーナル フリー

1989 年 22 巻 1 号 p. 48-54

詳細
抄録
Nickel/alumina catalysts were prepared by the deposition of nickel chloride vapor on spherical alumina (3.5 mm diameter) followed by reduction. This paper describes the effects of preparation conditions (deposition time and deposition temperature) on the nickel content, the nickel concentration profile, and the nickel particle diameter.
The nickel content increased with increasing deposition time of nickel chloride vapor, and decreased with increasing deposition temperature. The average nickel particle diameters were observed by TEM, and were not affected substantially by deposition time or deposition temperature. They ranged from 500 to 650 nm. The intraparticle penetration of nickel proceeded with increasing deposition time. The activation energy of acetylene hydrogenation was about 50 kJ·mol–1, regardless of the preparation method, which involves gas phase method and impregnation method. The activity per unit surface area of nickel showed the following order: vapor deposition nickel/alumina > gas phase reduction nickel ≅ impregnated nickel/alumina.
著者関連情報
© 1989 The Society of Chemical Engineers, Japan
前の記事 次の記事
feedback
Top