JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Online ISSN : 1881-1299
Print ISSN : 0021-9592
Process Systems Engineering and Safety
Model Predictive Control of Coke Oven Gas Collector Pressure
Xinming LiuXianwen GaoXinzhe Liu
著者情報
ジャーナル 認証あり

2014 年 47 巻 3 号 p. 267-277

詳細
抄録
In the light of the existing control problems in coke oven gas collector pressure systems, a model predictive control (MPC) method based on subspace identification of the gas collector pressure control system is presented. Through the analysis of a number of measurable variables, the main decision variables which affect gas collector pressure including the controllable input variables and the measurable disturbance can be obtained. The proposed method employs a subspace technique for the identification of the coke oven gas collector pressure control system, and simulates the disturbance of coal charging by a pulse signal with a certain width. A two-layer structure optimal control system of coke oven gas collector pressure is established and thus steady-state optimization and dynamic control can be realized, respectively. With consideration of the influence of measurable disturbance, we calculate the steady-state target through the degrees of freedom of the system, and then constrained MPC dynamic optimization is carried out. The algorithm has been successfully applied in the JN-8-type coke oven gas collector pressure control system of an iron and steel group, and has achieved good results.
著者関連情報
© 2014 The Society of Chemical Engineers, Japan
前の記事 次の記事
feedback
Top