Online ISSN : 1881-9664
Print ISSN : 0917-0480
ISSN-L : 0917-0480
In-situ Observation of Stress Corrosion Crack during Slow Strain Rate Test and Estimation of the Crack Behavior by Fracture Mechanics and Statistics
Toshio ShibataTakumi Haruna
Author information

1992 Volume 41 Issue 12 Pages 809-815


Slow strain rate test, SSRT, has been widely used for studies of stress corrosion cracking, SCC. In evaluating SCC susceptibility, it is important to analyze initiation and growth of SCC separately even if SSRT is used. Then we have developed a new SSRT system with a high magnification and high focusing depth CCD camera in order to make in-situ observation of crack behavior on the whole specimen surface during SSRT, and analyzed initiation and growth of crack separately by using fracture mechanics and statistics. As a result, the number of pits, at which crack generated, was found to increase with increase in strain. The Weibull distribution was found for KISCC and its mode was 2MN·m-3×2. While, crack growth rate showed double exponential distribution and its mode was about 10-8m·s-1. Thus, This technique could evaluate SCC susceptibility by separating crack initiation and growth.

Information related to the author
© Japan Society of Corrosion Engineering
Previous article Next article