Zairyo-to-Kankyo
Online ISSN : 1881-9664
Print ISSN : 0917-0480
ISSN-L : 0917-0480
Non-Destructive Technique of Evaluating Defects on a Concrete Plate by an Acoustic Impact Method
Yoshinori IsomotoTomohiro Kajiwara
Author information
JOURNAL FREE ACCESS

2003 Volume 52 Issue 12 Pages 656-661

Details
Abstract

It is very important to assess component materials such as concrete structures with non-destructive techniques. An acoustic impact method takes advantages of an easy handling and low costs in many other non-destructive techniques. Fourier spectrum, which was obtained by a fast Fourier transform of detected waves was examined for the evaluation of artificial defects formed on the square concrete samples. The effects of a striker and a detector on the Fourier spectrum were discussed to detect defects and their positions in the specimen. Vibration mode analyses were attempted to clarify the cause of the many peaks of frequency in the Fourier spectrum. It is found that the peak frequency, its amplitude and half-power bandwidth of the frequency spectrum can be indicators for detecting the artificial defect. The results suggested that this acoustic impact method using a steel ball as a striker and a microphone as a detector was fairly useful as one of non-destructive techniques for the assessment of concrete structures.

Content from these authors
© Japan Society of Corrosion Engineering
Previous article Next article
feedback
Top