Journal of Japan Foundry Engineering Society
Online ISSN : 2185-5374
Print ISSN : 1342-0429
ISSN-L : 1342-0429
Research Article
Approach for an Increase in Flow Rate at Start of Pouring from Auto Pouring Equiprnent by 2-Stage Up-Down Mechanism of Tilt-Center
Masao Matsuda, Sadatoshi Koroyasu
Author information
JOURNAL FREE ACCESS

1999 Volume 71 Issue 7 Pages 443-448

Details
Abstract
  Flow of water from a pouring equipment with a quick tilt-center up-down mechanism by the two stage air cylinder were studied experimentally. When the down stroke of the tilt-center was increased by the two stage motion of the air cylinder and returned to the stroke of the single motion, the flow rate at the start of pouring increased further than single motion with no change of the total pouring volume. Experiments on the flow of water in the gating system from the pouring equipment with the above mechanism were carried out. The experimental data showed that the liquid level in the pouring basin rose up more rapidly than the case of the single cylinder motion.
Content from these authors
© 1999 Japan Foundry Engineering Society
Next article
feedback
Top