Effects of Inflow Distortion due to Hub Cap's Shape on the Performance of Axial Flow Fan

抄録

Performance characteristics of an axial flow fan having distorted inlet flow have been investigated using numerical analysis. Two kinds of hub-cap, rounded and right-angled front shape, are tested to investigate the effect of inlet flow distortion on the fan performance. In case of right-angled front shape, axisymmetric distorted inflow is induced by flow separation at the sharp edge of hub-cap, and the characteristics of the inflow depend on the distance between hub-cap and blade leading edge. Three-dimensional Reynolds-averaged Navier-Stokes equations are introduced to analyze the flow characteristics inside the blade passage. Numerical solutions are validated in comparison with experimental data measured by a five-hole probe downstream of the fan rotor. It is found from the numerical results that non-uniform axial inlet velocity profile near the hub results in the change of inlet flow angle. Large recirculation flow upstream the fan rotor for the right-angled hub-cap induces separated flow on the blade surfaces near the hub region, and thus deteriorates the performance of fan rotor. The effect of the distance between hub-cap and blade leading edge on the efficiency is also discussed.