Japanese Geotechnical Society Special Publication
Online ISSN : 2188-8027
ISSN-L : 2188-8027
6. Foundations - Bearing capacity, Part 2
Bearing capacity of hybrid suction foundation on sand with loading direction via centrifuge model test
Jae Hyun KimSurin KimDong Soo KimJun Ung YounDong Joon KimSung Hyun Jee
著者情報
ジャーナル フリー

2016 年 2 巻 37 号 p. 1339-1342

詳細
抄録
Suction caisson is widely used to support offshore structure. However, this type of foundation may not provide sufficient resisting capacity economically under external loads. Recently, to give an increased capacity on the foundation, hybrid foundation concept was proposed to satisfy engineering needs as well as cost reduction of structures. Hybrid foundation concept is combination of skirted mat and suction caisson(s). Suction caisson(s) is fitted on the mat foundation intended to increase load capacity. This paper investigates the behavior of a hybrid suction foundation installed in sand layer for vertical and lateral loads, respectively. A series of centrifuge test have been conducted to assess the load capacity of the hybrid foundation and compared to those of the conventional single suction caisson. The primary goal of this study is to comprehend the effect of the mat compartment on foundation behavior under loading directions, and corresponding bearing capacity. Finally, feasibility of the hybrid foundation for offshore foundation was confirmed.
著者関連情報
前の記事 次の記事
feedback
Top