プラズマジェットによるメタンからアセチレンの製造 (IV)

アセチレン収率

抄録

In the acetylene formation methane using an argon plasma jet reactor, effects of argon, methane flow rates and plasma power on acetyelene yield have been investigated.
The results obtained were as follows:
(1) Optimum condition was found to be indicated as
(Q₀, m/F_M) ^1.53= (100/43.2) (FA/FM+1)
where Q₀, m is plasma power, FA and Fm flow rate of argon and methane respectively.
(2) Maximum acetylene yield obtained was 80-90%.