2024 Volume 74 Issue 3 Pages 147-152
Cube specimens of AC4B aluminum alloy, Al-1%Mg, and Al-3%Mg were oxidized in air at 773 K for up to 25 h to investigate the influence of heat treatment time and Mg concentration. The original specimens and oxidation products were characterized by X-ray diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. SEM observation showed that the oxide scale grew thick and the surface of the oxide scale consisted of granular grain. Simultaneously, the tone color of the specimens became darker. The XRD and XPS analysis indicated that oxide scales mainly consist of MgO and MgAl2O4, and the top surface was covered with MgO. In addition, the ratio of MgAl2O4 on the surface of oxide scales tended to increase with heat treatment time. The XPS depth profile of Al-3%Mg alloy showed that oxide scale grew up to the thickness of 6μm. The thermodynamic calculations suggested that the most stable compound on the surface of specimens is MgAl2O4 and then the kinetic factor is strongly influenced by the surface oxidation of Mg-containing Al alloys.