Published: November 30, 1988Received: -Available on J-STAGE: July 23, 2008Accepted: August 23, 1988
Advance online publication: -
Revised: -
Correction information
Date of correction: July 23, 2008Reason for correction: -Correction: CITATIONDetails: Wrong : 1) D. Hanson and M. L. V. Gayler: J. Inst. Metals, 26 (1921), 321. 2) H. W. L. Phillips: J. Inst. Metals, 72 (1946), 151. 3) H. W. L. Phillips: Institute of Metals, Monograph Rep. Series 25, 1959. 4) P. R. Sperry: Pro. 3rd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 21, 1984. 5) P. Furrer: Z. Metallkde, 70 (1979), 699. 7) K. Ohori and Y. Takeuchi: Pro. 3rd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 63, 1984. 8) O. Reiso, H. Westengen and L. Auran: Pro. 7th Inter. Confer. Light Metals, p. 186, 1981. 9) H. Westengen, L. Auran and O. Reiso: Aluminium, 57 (1981), 797. 10) L. F. Mondolfo: Aluminum Alloys; Structure and properties, p. 567, Butter Worths, 1976. 11) G. Thomas: J. Inst. Metals, 90 (1961-62), 57. 12) A. Kelley and R. B. Nicholson: Pro. Mater. Sci., 10 (1963), 151. 13) A. Guinier and H. Lambot: Compt. Rend., 227 (1948), 74. 14) A. Lutts: Acta Met., 9 (1961), 577. 15) T. V. Shchegoleva: Phy. Metals Metallog., 25 (1968), 56. 16) C. panseri and T. Federighi: J. Inst. Metals, 94 (1966), 99. 17) A. H. Geisler and J. K. Hill: Acta cryst., 1 (1948), 238. 19) H. Westengen and N. Ryum: Z. Metallk., 70 (1979), 528. 20) Metals Hand Book, Vol. 2, p. 271, ASM. 22) J. langerweger: Proc. Aluminium Technology '86, Paper No. 49. 23) G. W. Lominer and R. B. Nicholson: Acta Met., 14 (1966), 1009. 24) D. W. Pashley, M. H. Jacobs and J. T. Vietz: Phil. Mag., 16 (1967), 51. 30) D. Marchive and R. Deschamps: Aluminium, 55 (1979), 37; Rev. de. L'Aluminium, 489 (1979), 461. 31) T. Sheppard: Mater. Sci. Tech., 4 (1988), 635. 32) C. V. Lynch: Light Metal Age, 27 (1969), 22; Pro. 1st Inter. Aluminum Extrusion Tech, Semi., Paper No. 25, 1969. 35) J. C. Benedyk: Light Metal Age, 26 (1968), 10. 36) H. J. Rack and R. W. Krenzer: Met. Trans., 8A (1977), 335. 37) H. J. Rack: Mater. Sci. Eng., 29 (1977), 179. 41) R. Develay: Rev. de. L'Aluminium, 490 (1980), 137. 43) J. Langerweger: Aluminium, 58 (1982), 6. 44) C. J. Heathcock, J. D. Cooke and S. A. Nugent: Pro. 4th Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 85, 1988. 46) Metals Handbook: p. 28, ASM, 1985. 47) B. W. Bischof and J. F. Whiting: Modern Metals, Nov. (1955), 34. 48) W. Gruhl and G. Scharf: Z. Metallk., 57 (1966), 597. 51) O. Reiso: Pro. 3rd Inter. Aluminumr Extrusion Tech. Semi., Vol. 1, p. 31, 1984. 52) E. C. Beatty: Pro. 2nd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 225, 1977. 53) L. R. Morris, F. B. Miner and J. B. Lowe: UK Patent, 1333327. 54) H. Bischel, A. Reid and J. Langerweger: Aluminium, 57 (1981), E281. 56) A. F. Castle and G. Lang: Aluminium, 53 (1977), 535. 57) Y. I. Kukushkin: Light Metal Age, 40 (1982), 22. 58) G. Thomas: Electron Microscopy and Strength of Crystals, p. 793, Interscience, 1963. 59) G. Lang and A. F. Castle: Pro. 2nd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 293, 1977. 60) A. Annenkoff: Pro. 4th Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 97, 1988. 62) A. Maitland and A. Ried: Pro. 2nd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 297, 1977. 63) D. Marchive: Light Metal Age, 41 (1983), 6. 64) J. Aucote and D. W. Evans: Metal Sci., 12 (1978), 57. 65) P. Schwellinger: Aluminium, 55 (1979), 136. 66) J. M. Dowling and J. W. Martin: Acta Met., 24 (1976), 1147. 67) J. D. Evensen, N. Ryum and J. D. Embury: Mater. Sci. Eng., 18 (1975), 221. 68) K. C. Prince and J. W. Martin: Acta Met., 27 (1979), 1401. 69) P. V. Raymond and J. W. Martin: Z. Metallk., 70 (1979), 80. 70) C. Scharf and B. Grzemba: Aluminium, 58 (1982), 391. 72) J. W. Evancho and J. G. Kaufman: Aluminium, 53 (1977), 609; Automotive Engineering, 85 (1977), 48.
Right : 1) D. Hanson and M. L. V. Gayler: J. Inst. Metals, 26 (1921), 321. 2) H. W. L. Phillips: J. Inst. Metals, 72 (1946), 151. 3) H. W. L. Phillips: Institute of Metals, Monograph Rep. Series 25, 1959. 4) P. R. Sperry: Pro. 3rd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 21, 1984. 5) P. Furrer: Z. Metallkde, 70 (1979), 699. 7) K. Ohori and Y. Takeuchi: Pro. 3rd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 63, 1984. 8) O. Reiso, H. Westengen and L. Auran: Pro. 7th Inter. Confer. Light Metals, p. 186, 1981. 9) H. Westengen, L. Auran and O. Reiso: Aluminium, 57 (1981), 797. 10) L. F. Mondolfo: Aluminum Alloys; Structure and properties, p. 567, Butter Worths, 1976. 11) G. Thomas: J. Inst. Metals, 90 (1961-62), 57. 12) A. Kelley and R. B. Nicholson: Pro. Mater. Sci., 10 (1963), 151. 13) A. Guinier and H. Lambot: Compt. Rend., 227 (1948), 74. 14) A. Lutts: Acta Met., 9 (1961), 577. 15) T. V. Shchegoleva: Phy. Metals Metallog., 25 (1968), 56. 16) C. panseri and T. Federighi: J. Inst. Metals, 94 (1966), 99. 17) A. H. Geisler and J. K. Hill: Acta cryst., 1 (1948), 238. 19) H. Westengen and N. Ryum: Z. Metallk., 70 (1979), 528. 20) Metals Hand Book, Vol. 2, p. 271, ASM. 22) J. langerweger: Proc. Aluminium Technology '86, Paper No. 49. 23) G. W. Lominer and R. B. Nicholson: Acta Met., 14 (1966), 1009. 24) D. W. Pashley, M. H. Jacobs and J. T. Vietz: Phil. Mag., 16 (1967), 51. 30) D. Marchive and R. Deschamps: Aluminium, 55 (1979), 37 30) D. Marchive and R. Deschamps: Rev. de. L'Aluminium, 489 (1979), 461. 31) T. Sheppard: Mater. Sci. Tech., 4 (1988), 635. 32) C. V. Lynch: Light Metal Age, 27 (1969), 22; Pro. 1st Inter. Aluminum Extrusion Tech, Semi., Paper No. 25, 1969. 35) J. C. Benedyk: Light Metal Age, 26 (1968), 10. 36) H. J. Rack and R. W. Krenzer: Met. Trans., 8A (1977), 335. 37) H. J. Rack: Mater. Sci. Eng., 29 (1977), 179. 41) R. Develay: Rev. de. L'Aluminium, 490 (1980), 137. 43) J. Langerweger: Aluminium, 58 (1982), 6. 44) C. J. Heathcock, J. D. Cooke and S. A. Nugent: Pro. 4th Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 85, 1988. 46) Metals Handbook: p. 28, ASM, 1985. 47) B. W. Bischof and J. F. Whiting: Modern Metals, Nov. (1955), 34. 48) W. Gruhl and G. Scharf: Z. Metallk., 57 (1966), 597. 51) O. Reiso: Pro. 3rd Inter. Aluminumr Extrusion Tech. Semi., Vol. 1, p. 31, 1984. 52) E. C. Beatty: Pro. 2nd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 225, 1977. 53) L. R. Morris, F. B. Miner and J. B. Lowe: UK Patent, 1333327. 54) H. Bischel, A. Reid and J. Langerweger: Aluminium, 57 (1981), E281. 56) A. F. Castle and G. Lang: Aluminium, 53 (1977), 535. 57) Y. I. Kukushkin: Light Metal Age, 40 (1982), 22. 58) G. Thomas: Electron Microscopy and Strength of Crystals, p. 793, Interscience, 1963. 59) G. Lang and A. F. Castle: Pro. 2nd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 293, 1977. 60) A. Annenkoff: Pro. 4th Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 97, 1988. 62) A. Maitland and A. Ried: Pro. 2nd Inter. Aluminum Extrusion Tech. Semi., Vol. 1, p. 297, 1977. 63) D. Marchive: Light Metal Age, 41 (1983), 6. 64) J. Aucote and D. W. Evans: Metal Sci., 12 (1978), 57. 65) P. Schwellinger: Aluminium, 55 (1979), 136. 66) J. M. Dowling and J. W. Martin: Acta Met., 24 (1976), 1147. 67) J. D. Evensen, N. Ryum and J. D. Embury: Mater. Sci. Eng., 18 (1975), 221. 68) K. C. Prince and J. W. Martin: Acta Met., 27 (1979), 1401. 69) P. V. Raymond and J. W. Martin: Z. Metallk., 70 (1979), 80. 70) C. Scharf and B. Grzemba: Aluminium, 58 (1982), 391. 72) J. W. Evancho and J. G. Kaufman: Aluminium, 53 (1977), 609; Automotive Engineering, 85 (1977), 48.
Date of correction: July 23, 2008Reason for correction: -Correction: PDF FILEDetails: -