臼歯単独補綴歯冠の高さの調整が歯列咬合接触に及ぼす影響

2. 咬合接触面積からみた単一臼歯の咬合の高さ

抄録

The purpose of this study is to establish an index in adjustment of occlusal height of a cast crown by the silicone-black method.
Firstly, occlusal contact area in dentition was measured when occlusal height and proximal contacts of the molar tooth were varied. Secondly, validity of this index was investigated in adjustment of occlusal height of a cast crown.
The results obtained were as follows:
1) In case that any the second premolar, the first molar, or the second molar was an abutment tooth, occlusal contacts of the mesial tooth close to them came into being only when occlusal height of a crown was made high less than 100μm.
2) In case that any the first premolar was an abutment tooth, occlusal contacts of a contralateral one came into being only when occlusal height of a crown was made high less than 100μm.
3) It was found that phenomena of 1) and 2) were an useful index in adjustment of occlusal height of a crown.