粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
研究
高周波熱プラズマによる球状銅系サブミクロン粒子の作製
小林 法夫川上 裕二鎌田 啓嗣李 継光渡辺 隆行石垣 隆正
著者情報
ジャーナル オープンアクセス

2007 年 54 巻 1 号 p. 39-43

詳細
抄録
Spherical submicron copper particles were synthesized through evaporation and subsequent condensation of copper powders in Ar-H2 thermal plasma. Copper powders of ∼40μm in size injected into the plasma, evaporated instantly and fine particles were formed through homogeneous nucleation and subsequent heterogeneous condensation. Particle size and the distribution in the synthesized powders were changed depending on the powder feed rate. Formation of submicron size spherical powders attributed to a significantly high degree of supersaturation in a vapor phase. Particle sizes of the as-produced powders range from submicron to several tens of micrometers. A simple sedimentation treatment was successfully applied to separate the as-formed powders with alcohol solvent to give uniform spherical submicron-size particles with monomodal size distributions. Cu-W composite powders were synthesized through the Ar-H2 plasma treatment of Cu-WO3 composite powders. The starting temperature of shrinkage was made significantly higher than pure Cu powders by mixing with several wt% of W.
著者関連情報
© 2007 一般社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top