粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
研究
易焼結性アルミ青銅粉の製造とその焼結体特性
益岡 佐千子新見 義朗
著者情報
ジャーナル オープンアクセス

2008 年 55 巻 6 号 p. 464-469

詳細
抄録
In order to accelerate the sintering of Al-bronze powder covered with the oxide film in the hydrogen atmosphere containing high amount of nitrogen, we added phosphorus in the form of the phosphorus alloy in addition to Al-Ca fluoride the effect of which we reported in the previous paper. Al-bronze powder which was well sintered and formed the sintered compacts with higher strength even in the atmosphere containing high amount of nitrogen was obtained by adding over 0.2 mass% phosphorus. In the wear test of the above sintered compacts, it was found the dynamic friction coefficient and the wear rate of the Al-bronze sintered compacts were nearly half of those of Sn-bronze, and furthermore the wear rate of the Al-bronze sintered compacts decreased remarkably by dispersing 3 mass% of graphite.
著者関連情報
© 2008 一般社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事
feedback
Top