粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
受賞記念講演
セラミックス粉体の合成と各種焼結法を組み合わせた新規モノリシック およびハイブリッド材料の作製に関する研究
廣田 健
著者情報
ジャーナル オープンアクセス

2014 年 61 巻 1 号 p. 3-10

詳細
抄録
Bronze-type TiO2(B) single-crystal fibers with several microns in length and 300~400 nm in diameter, were synthesized from anatase TiO2 by the supercritical fluid hydrothermal treatment at c.a. 375~425 ˚C under 23~37 MPa in 10 mol • L−1 NaOH aq. followed by ion-exchange of Na to H in dilute HCl aq. and post-heating at 400 ˚C for 5 h in air. Thus prepared TiO2(B) fibers were characterized by XRD analysis, SEM/TEM observations, ED analysis, DTA/TG and BET surface area measurements. Electrical conductivity of the fibers was also evaluated using “Nano-probe” measurement system. Compared to the conventional TiO2(B) fibers prepared from the normal hydrothermal treatment at c.a.185 ˚C for 8 h, the present TiO2(B) showed higher thermal stability; TiO2(B) phase was stable even after heating at 800 ˚C for 1 h in air. And they show an extreme high electrical conductivities of 1.2 ~1.3 S • m−1; they were higher 1011 and 1.5 times than those of anatase TiO2 and conventional TiO2(B), respectively
著者関連情報
© 2014一般社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top