Development of Corrugated Ceramic Sheet for SOFC Electrolyte by Micro Imprint Process

Abstract

Yttria-stabilized zirconia (YSZ) has been used for an electrolyte of solid oxide fuel cells (SOFC). To enhance the efficiency of SOFC, we developed a corrugated, or wavy-shaped, YSZ sheet for the electrolyte. As the corrugated sheet has larger surface area than a flat-type sheet, higher energy density can be obtained. We have proposed micro powder imprint (μPI) with multi-layer imprint process to fabricate micro scale pattern on the both surfaces of a thin YSZ sheet. The μPI is a combined process of nano imprint lithography and powder metallurgy; the resolution is high, and the process is mass-productive. In this work, we selected a compound material containing YSZ powder and a binder consisting of thermoplastic resin as a starting material. The compound sheet was prepared by tape casting from slurry and was imprinted by a fine-patterned mold with stacked on a silicone rubber sheet. The silicone rubber was so flexible that micro patterns on the both sides of the compound sheet was obtained after imprint. In the present work, the process condition of μPI and the heat program of debinding and sintering were also considered. As a result, a wave-type sintered YSZ sheet without significant defects was successfully obtained.