粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
研究論文
金属積層造形条件がポーラス構造SUS630の引張強度に及ぼす影響
田代 徹也金尾 憧磨永田 侑也壷田 真
著者情報
ジャーナル 認証あり

2022 年 69 巻 7 号 p. 293-298

詳細
抄録

Porous metal materials are constructed using selective laser melting (SLM). Porous metals exhibit different physical and mechanical properties. It is vital to understand how process parameters affect mechanical qualities so that SLM objects can be used in diverse components. In this study, SUS630 specimens were developed under various combinations of laser parameters. The influence of laser power and scanning speed on the tensile strength of porous SUS630 was investigated. Initially, 13 porous specimens were produced under diverse conditions. The tensile tests were performed on these specimens, and their density was evaluated. These results indicated that the energy density affected the tensile strength. In the porous specimens, an experimental equation describing the link between tensile strength and energy density was formulated. Furthermore, the tensile strength in the laminating direction was lower in the porous specimens than in the other orientations.

著者関連情報
© 2022 一般社団法人粉体粉末冶金協会
前の記事 次の記事
feedback
Top