チタン酸バリウム焼結体の高温圧縮変形解析とFEMシミュレーション
キーワード:
Barium titanate,
sintering,
yield stress,
coefficient of flow stress,
finite elemental method
論文ID: 23-00087
この記事には本公開記事があります。
詳細
論文ID: 23-00087
In shis study, yield stress equation, flow rules and physical properties of barium titanate (BaTiO3) are experimentally obtained. These basic equations and coefficient of flow stress are introduced to finite element method and sintering behavior of barium titanate bulk is simulated. From the uni-axis compression test, yield stress equation of BaTiO3 is expressed by Shima’s equation and flow rule is written by plastic equiation. The coefficient of flow stress of BaTiO3 is significantly smaller than literature Alumina and the value is different when the grain size is different. The experimental sintering deformation is quantitatively reproduced by numerical simulation, where basic equation and physical properties are exprerimentally introduced. In addition, the coefficient of flow stress could be determined by simulation sensitivily analysis. Through this study, experimentally obtained yield stress equation, flow rules and coefficient of flow stress are numerically validated.
