粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
WO3とカーボン混合粉からのWCの直接生成に関する研究
原 昭夫三宅 雅也山本 孝春
著者情報
ジャーナル オープンアクセス

1975 年 22 巻 1 号 p. 12-16

詳細
抄録
The reason why WC powder of good quality cannot be obtained by the process of heating the WO3 and C mixture in H2 was examined by simple experiments. The authors obtained the following conclusions so that the 2 stage-carburization was adequate to solve the problem.
1) The reduction by H2 occurs preferentially to the reduction by C when the mixture of WO3 and C is heated in H2.
2) The H2O formed by the reaction of WO3+H2 reacted with carbon at the reacting zone. The quantity of the H2O depends upon both the way of charging and heating conditions, affecting the carbon content of WC.
3) WC crystals of abnormal shape were found when the coarse WO3 powder was used. The reason was discussed.
4) The WC powder of good quality was obtained when the H2O was either completely removed or not formed and when fine WO3 powder was used.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top