粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
WC-Ni混合粉末の成形性について
土屋 信次郎寺田 修佐々木 章鈴木 寿
著者情報
ジャーナル オープンアクセス

1989 年 36 巻 3 号 p. 292-295

詳細
抄録
The strength increase of green compact, that is, the higher compactibility of WC-Ni mixed powder made by ball-milling seems to be needed in the cemented carbide industry. Then, the study of the compactibility was carried out comparing with that of WC-Co powder. It was found that the compactibility of WC-Ni powder was generally lower than that of WC-Co one, when ball-milling condition was fixed, and that the phenomenon was caused by the fact that the size of binder-agglomerates formed during milling was larger in WC-Ni powder. Thus, refinning the agglomerates, for instance, by a prolonged ballmilling was necessary to improve the compactibility. The influence of agglomerates on the compactibility was discussed.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top