粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
焼成過程中の成分散逸を利用したMgO-SUS304系傾斜機能材料の作製
西田 俊彦藤岡 秀彰西川 友三
著者情報
ジャーナル オープンアクセス

1990 年 37 巻 2 号 p. 259-262

詳細
抄録
A homogeneous mixture of ultrafine MgO powder and SUS304 atomized powder was press-formed under a pressure of 500 kgf/cm2. The obtained green compacts were sintered at 1250°- 1430°C for2 hr in Ar. The composition along the cross section of the bodies sintered at 1300°- 1400°C was not uniform; the results of EPMA and XMDA showed that the Mg and MgO content decreased gradually from the center to the surface of the bodies. Possible mechanism for the appearance of the compositional gradience was discussed on the basis of the partial vaporization of MgO and chemical reaction associated with it.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top