粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
高温超伝導厚膜を用いた磁気シールドの作製
塚本 惠三石井 守下嶋 浩正山岸 千丈高田 雅介引津 禎彦山下 努鯉沼 秀臣
著者情報
ジャーナル オープンアクセス

1990 年 37 巻 5 号 p. 692-695

詳細
抄録
A superconducting tube has been developed for a magnetic shielding. This tube was composed of 22 pieces of Bi(Pb)-Sr-Ca-Cu-O ring disks prepared by a doctor blade method. As the magnetic field was applied parallel to the axis of the tube, the magnetic flux density was shielded up to 21 gauss by the tube. Then, the decay of the trapped magnetic flux density for the tube showed logarithmic dependence in time. The activation energy estimated from Anderson's flux creep model was about 0.3eV.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top