Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Sintering and Mechnical Properties of Al2O3 Composites with Two-Layered Structure
Hidemi WatanabeOsamu KimuraAtushi NakahiraKoichi Niihara
Author information
JOURNAL OPEN ACCESS

1991 Volume 38 Issue 3 Pages 378-381

Details
Abstract
A two layered Al2O3, /SiC composite is prepared. The composite consists of un-reinforced Al2O3, layer and 10 Vol%-SiC whisker reinforced Al2O3, layer, which are simultaneously sintered by hotpressing. Flexural strength of the composite reaches 300MPa and diffrence fracture toughness Kic: are observed for two layers, namely, 5MPam1/2 for reinforced layer and 2MPam1/2 for un-reinforced layer, respectively. Also, thermal stresses resulted in during cooling down to room temperature is discussed.
Content from these authors
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top