粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
貴金属粘土の開発
星野 孝二河野 通森川 正樹
著者情報
ジャーナル オープンアクセス

1993 年 40 巻 8 号 p. 837-840

詳細
抄録
Precious Metals Clay which is a mixture of a precious metal powder and organic binders was doveloped. Two types clays were made by the binders of the different compositions. One resembled a paper clay and others resembled a chewing gum. Sintering process was investigated to make a gold of 18 carat from the Precious Metals Clay contained a mixed powder of 75%Au-12.5%Ag-12.5%Cu. The results showed that the two steps sintering process involving oxidation and reduction was suitable to sinter it. The sintered precious metals had enough strength to use as an ornament or a jewelery, although the mechanical properties were lower than the cast materials. Hollow beads could be made from the Precious Metals Clay using the Core Clay which was made of cellulose.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事
feedback
Top