抄録
FeSi2(β phase) semiconducting iron silicide, which is expected to be widely used as a thermoelectric material in high temperature environment, is formed below 1259K by the peritectoid reaction of FeSi(ε) and Fe2Si5(α) two metallic phases. Because the transformation of ε+α→β caused by this peritectoid reaction occurs considerably slowly, the iron silicide material which is produced by sintering of the powder at temperatures above 1259K has to be isothermally heat-treated for at least 180ks at about 1120K after the sintering so that the transformation occurs completely.
We have found that the transformation was drastically accelerated by the addition of a small amount of Pd in the same way as Cu; the isothermal heat-treatment time necessary for the completion of the transformation was reduced to about 1/60. The sintering time needed for the almost full densification of the powder by pressure DCL sintering (DCL; direct current loading) was also reduced. A hypothesis for the mechanisms was proposed.
