粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
高強度窒化ケイ素セラミックスの開発と製品化
三宅 雅也
著者情報
ジャーナル オープンアクセス

1998 年 45 巻 6 号 p. 515-522

詳細
抄録
Due to its superior resistance to thermal shock, wear and oxidation, and high toughness, Si3N4 ceramics are expected to be used in industrial applications. However, before these Si3N4 ceramics can become better established on the market, their fracture strength, fracture toughness characteristics and reliabilty must be improved.
In this study, the formation mechanisms of the inside pores at the pressureless sintering conditions that yield the thick body of uniform structure were invesigated.
The creep properties of sintered body were studied by analyzing the results of internal friction measurements.
Hugoniot-compression curve for Si3N4 ceramics with controlled microstructure were measured to study the yeilding properties under shock compression. And the correlations with Hugoniot-elastic limits and microstructure of Si3N4 ceramics were considered.
The degradation characteristics of bending strength of specimens after processing under various grindingg condition were evaluated.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top