粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Process for Production of Ti Sintered Compacts Using the Injection Molding Method
Hidefumi NakamuraTokihiro ShimuraKouei Nakabayashi
著者情報
ジャーナル オープンアクセス

1999 年 46 巻 8 号 p. 870-876

詳細
抄録
Pure Ti, which is used in the field of Metal Injection Molding (MIM), can be used to produce parts with complicated shapes. But, since oxidation, nitrogen and carbonization are generated during the debinding-sintering process, the mechanical properties of the sintered material cannot achieve the same level as those of the ingot material. Accordingly, we have studied the debinding and sintering methods by using various binder systems. This paper reports on the mechanical properties required by customers (0.2%proof stress of 216 MPa or more, tensile strength of 343 to 510 MPa, and elongation of 10% or more)and the development of the parts production process.
著者関連情報
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top