粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
MgO顆粒粉の流動成形による長尺な薄肉円筒焼結体の高精度化
高橋 清造中川 威雄
著者情報
ジャーナル オープンアクセス

2000 年 47 巻 3 号 p. 282-286

詳細
抄録
A long-thin cylider shaped compact was formed from MgO granule admixed with BINDCERAM, toluene and liquid paraffin by a single action tooling of flow compaction. The green density increased according to the liquid paraffin content and the sitered density of relative density 99% to MgO real density 3.58 g/cm3 was gotten by admixing 2 mass% BINDCERAM, 8 mass% toluene and 8 mass% liquid paraffin. This is caused by the reason that liquid paraffin affects a higher volume ratio of MgO powder in green compact. In the case of green compact formed from granule with sufficient flowability by admixing 8 mass% liquid paraffin, the powder flowed from higher densified upper portion to lower in a die cavity during a single action tooling and the difference in local density in green compact could be reduced. Therefore, the diameter of sintered compact was shrunk uniformity from green compact and the dimensional precision of sintered compact was improved if though the shrinkage of diameter was 17%.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top