粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
反応性放電プラズマ焼結によるTiB2-Ti(CN)複合体の合成
杉山 重彰浅利 孝一泰松 斉
著者情報
ジャーナル オープンアクセス

2000 年 47 巻 3 号 p. 308-314

詳細
抄録
Dense TiB2-TiCxN1-x and TiB2-Ti(C0.5N0.5)y composites were synthesized from powder mixtures of B4C, BN and Ti by reactive spark plasma sintering. The reaction 2xB4C+2(1-x)BN+3(x+1)Ti→(3x+1)TiB2+2TiCxN1-x for TiB2-TiCxN1-x and the reaction B4C+BN+(5/2+2/y)Ti→5/2TiB2+2/yTi(C0.5N0.5)y for TiB2-Ti(C0.5N0.5)y, proceeded during their sintering. The relative density of the TiB2-TiCxN1-x composites increased as the nitrogen content decreased, and the composites had relative densities more than 99 % at higher x than 0.5. The Young's modulus, Vickers hardness and fracture toughness of the composites increased with increasing x. For TiB2-Ti(C0.5N0.5)y composites, the relative density became still higher than 99.1 % at smaller y than 1, i.e., increasing nonstoichiometry. However, the Young's modulus, Vickers hardness and fracture toughness decreased with decreasing y value.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top