粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
放電プラズマ焼結された超微細粒鉄の硬さにおよぼす焼結時間と圧力の影響
川村 悟史桑野 寿武田 裕基高橋 志郎加賀 寿
著者情報
ジャーナル オープンアクセス

2003 年 50 巻 12 号 p. 1052-1056

詳細
抄録
Nanocrystalline iron powders with grain size of 13nm were prepared by ball-milling. The nano-structured iron powders were consolidated into discs with a diameter of 30 or 50 mm by Spark Plasma Sintering at 550°C under pressures between 80 to 220 MPa. The average grain size of the consolidated discs is about 80 nm. It does not depend on the sintering time at constant pressure. The Vickers hardness of the superfine grained iron sintered for 600 s with 220 MPa is 470 Hv. The value is plotted on the linearly extrapolated line of the Hall-Petch relationship obtained by Malow and Koch in the study on the grain size smaller than 40 nm.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top