粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
W-Ni-Cu系高密度合金の製造に関する研究
松川 達夫坂井 利幸
著者情報
ジャーナル オープンアクセス

1959 年 6 巻 2 号 p. 45-54

詳細
抄録
Ammonium paratungstate forms its double salt in existence of an ammoniacal soln. of the nickel salt. W-Ni compound powders obtained by calcining and reduction of this double salt are very fine and their shapes are intricate. Compound powders accordingly have superior properties as a raw material for "Heavy Alloys". The physical or the mechanical properties of the "Heavy Alloy" composed of 90% W, 1% Ni and 9% Cu are excellent, if the compound powders are used for a raw material. Density of an above-mentioned alloy which is sintered at 1, 240°C for only lhr. attains to 17.19g/c.c. Besides, the specific resistance is about 8μΩ⋅cm and the ultimate breaking strength shows 168kg/mm2.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
次の記事
feedback
Top