抄録
Ti and its alloys have been widely used for various industrial and medical applications because of their excellent characteristics of low density, high strength, high corrosion resistance and high biocompatibility. However, it is not easy to produce the complicated shape and precise parts because of their poor workability. Therefore, the advanced powder processing techniques such as Metal Injection Molding (MIM) are hoped to be a suitable technique for fabricating complex shaped Ti or its alloy parts with low cost. In this paper, various high performance Ti alloy materials such as Ti-6Al-4V added Mo or Fe or Cr have been developed by MIM process. The effect of powder type and sintering conditions on the microstructures, relative density and mechanical properties of injection molded compacts were investigated. Also the oxygen and carbon contents were checked in detail for obtaining high performance properties as same as the wrought materials. Eventually, more than 1000MPa of strength and 15% of elongation were achieved with MIM process.
