抄録
An impact load on a thick carbon fiber reinforced plastic (CFRP) plate usually causes a dent. The dent results in a decrease of electrical resistance. Our previous paper demonstrated the effect of the dent in the measurement of electrical resistance change of a thick CFRP plate subjected to impact loading. The present paper focuses on the electrical resistance decrease caused by the dent. Numerous FEM analyses were performed, and the relationship between electrical resistance changes and delamination location was constructed, by measuring the response surfaces. Several experiments were conducted and the measured electrical resistance changes were used to predict damage location from the response surfaces. The present study shows that the dent decreases the electrical resistance change ratio even in the adjacent segments, and the electrical resistance changes caused by the dent enable us to monitor the damage location. FEM analyses for a projected area model are sufficient to construct the relationships without resorting to many experiments.
